Function; Picture - UDI R/C U29 Plus WIING+ User Manual

Function

One Button Take Off And Landing
One Button Take Off
After calibration successfully, press this button, the drone
will fly up and keep flying at an altitude of approximately
1.2 meters.
One Button Landing
Press to land the drone automatically. (In this mode,
DO NOT touch the left stick, or the function will fail)
Emergency Landing
If the drone is in an emergency situation , such as if
it is about to hit people or obstacles, press the
Take Off / Landing / Emergency Stop Button and hold it for more than
1 second. The propellers will stop immediately and the drone will land quickly.
Altitude Hold Mode
Altitude Hold Mode allows the drone to maintain a consistent altitude while
allowing roll, pitch, and yaw to be controlled normally. This mode makes it easier
for beginners to control the drone and makes the drone
more stable for aerial photography.
To use Altitude Hold Mode, push the left stick up to fly the
drone up, or pull the stick down to fly down, to your
desired altitude , and then release the stick . The stick
will move back to the center position( Picture 22). The
drone will continue flying at its current altitude . Repeat to
change the drone altitude. (This function is available by default)
Note: If the propeller is deformed or damaged, the Altitude Hold Mode will fail.
If the atmospheric pressure is instability, the Altitude Hold Mode will fail.
Positioning Hold Mode
Position Hold Mode allows the drone to maintain a consistent position while
allowing roll, pitch , and yaw to be controlled normally. The Positioning Mode and
Altitude Hold Mode makes the drone more stable for aerial photography.
Notice: The ideal altitude of position hold is within 8m. The Position Hold can not work
well when flying too high or flying in the dark light or evening.
14
www.udirc.com
Altitude Hold Center

Picture 22