Aerial photography / real-time fpv / wifi control heading hold mode / low battery alarm out of range alarm / one button take off/landing high/low speed mode / custom route mode altitude hold mode (41 pages)
Page 1
U46W USER MANUAL Suitable for indoor flight ▲This product is suitable for users over 14 years old. ▲Stay away from the rotating propeller ▲Read the<important statement and safety guidelines >carefully.
Page 2
Ready Before Take Off Drone preparation Front (Prow) Propeller B Propeller A Drone Cover Housing Main frame Propeller B Propeller A Rear (Tail) Camera Drone LED Power Switch Charging port Rear (Tail)
Charging Instruction Battery power is insufficient in the original plant. It must be charged saturated before it can be used. Connect the original charging cable with the drone, and then connect other USB charging port. The drone red LED keeps bright when charging and the light turns green when fully charged.
Flight Operations Mobile phone connect with Drone Download and install APP: Flyingsee This software is suitable for mobile phones in the IOS and Android system. For detailed operation, please check the system “HELP” of APP. Transmitter connect with Drone Frequency Pairing ①...
Page 5
Control stick operation Left stick Counterclockwise turn Go up Go down Clockwise turn Right stick Forward Fly to the left Backward Fly to the right...
Page 6
Take off After the frequency pairing is successful, press the "take off/land" button, the transmitter will sound "di", and the drone will automatically rises and flies at an altitude of about 1.2 meters. Landing During the flight, press the "take off/land" button, the transmitter will sound "di", and the drone will land slowly until landing.
Page 7
Heading Hold Mode The default setting is NOT Heading Hold Mode. Heading Hold Mode means that the user can operate the aircraft without having to distinguish directions. This mode is suitable for beginners, or when it is difficult to distinguish the forward and backward direction of the drone. ①...
Page 8
Flying Trimmer Forward / Backward Trimmer During the flight, if the drone tilts forward, press down the left stick in the center button, and push the right stick backwards. Otherwise push forwards. Left and right turning trimmer During the flight, if the drone head rotates to Press down left,then press down the left stick in the center button and push the left stick to right.
Page 9
Altitude Hold Mode Intelligent flight control system calculates the hovering position, more stable control feature, makes it easier for beginners to control. Release the stick, the drone will keep hovering automatically to enable single hand operation. Note: If the propeller is deformed or damaged, Altitude Hold Mode will fail. If the atmospheric pressure is instability or Typhoon weather, Altitude Hold Mode can not work well.
Parts Replacement Propeller Replacement Disassembly: hold the propeller vertically and then pull the propeller out. Installation: mount propeller aim the central shaft of the motor and press down. There is different A and B remarks on the propeller. Be sure that the propellers are installed to the correct motors, which remarked the Letters to identify on the motor holder, if not, then the drone can not work normally.
Page 11
Parameter Drone APP / Live View Model U46W App Name Flyingsee Weitht 23g (typical value) Image transmission 2.4G wifi Size 66×66×37mm system Maximum 7 minutes(calm) Real time image 480 P@20 fps flight time transmission WIFI Distance 30m (indoor and Operation System...
Troubleshooting Guide Problem Problem Cause Solution 1. Low battery. 1. Replace the transmitter battery. 2. The battery positive pole and 2. Install the battery in accordance with transmitter negative pole are in reverse order. the user manual. indicator light is off 3.
FCC Note This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
Page 14
The equipment may generate or use radio frequency energy. Changes or modifications to this equipment may cause harmful interference unless the modifications are expressly approved in the instruction manual. Modifications not authorized by the manufacturer may void user’s authority to operate this device. This device complies with Part 15 of the FCC Rules.
Need help?
Do you have a question about the U46W and is the answer not in the manual?
Questions and answers