Email; Ftp - Speco O4VLB5 User Manual

IP Camera User Manual

4.6.7 Email

If you need to trigger Email when an alarm happens or IP address is changed, please set the Email here first. If you need to trigger Email when an alarm happens or IP address is changed, please
Go to Config Network Email.
Sender Address: sender's email address.
User name and password: sender's user name and password : sender's user name and password.
Server Address: The SMTP IP address or host name.
Select the secure connection type at the "Secure Connection
SMTP Port: The SMTP port.
Send Interval(S): The time interval of sending email. For example, if it is set to 60 seconds and The time interval of sending email. For example, if it is set to 60 seconds and multiple motion detection alarms are triggered within 60
seconds, they will be considered as only one alarm event and only one email will be sent. If one motion alarm event is triggered and then another
motion detection alarm event is triggered after 60 seconds, two emails motion detection alarm event is triggered after 60 seconds, two emails will be sent. When different types of alarms
multiple emails will be sent separately.
Click "Test" button to test the connection of the account.
Recipient Address: receiver's email address.

4.6.8 FTP

After an FTP server is set up, captured images from events
Go to the FTP tab.
21
Connection" pull-down list according to what's required.
one alarm event and only one email will be sent. If one motion alarm event is triggered and then another one alarm event and only one email will be sent. If one motion alarm event is triggered and then another
of the account.
from events will be uploaded to the FTP server.
motion detection alarms are triggered within 60
different types of alarms are triggered at the same time,