Table of Contents
Advertisement
7.1.2 Attaching The Pistol Grip
The pistol grip is attached to the four threaded inserts on the back of the WORK-
ABOUT PRO. Four Phillips head screws are provided with this accessory.
Note: Prior to installation, make sure the trigger mechanism is securely
snapped into the pistol grip body and that the trigger operates properly.
•
Position the pistol grip so that it fits snugly over the back of the unit and the
holes in the pistol grip are aligned with the threaded inserts on the back of
the WORKABOUT PRO.
•
Tighten the screws to a torque of 3 lbs-in (3kgf-cm) to secure the pistol grip
in place.
WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual
Chapter 7: Peripheral Devices & Accessories
Attaching The Pistol Grip
269
Hide quick links:
Advertisement
Table of Contents
Troubleshooting
