Display Parameters - Psion Teklogix ISO 9001 User Manual

Chapter 5: Settings
Options Tab
"Dot Time" parameter and initiates a normal scan sweep. If a value is assigned for
the "Click Data" parameter, double-clicking the scanner trigger inserts the "Click
Data" value rather than initiating a scan.
Click Data
For both integrated and external scanners, this parameter determines which
character is sent to the application installed in your hand-held following a double-
click. A dialog box appears, asking that you press the key you want to insert. The
ASCII/Unicode key value of the keypress is displayed.

5.27.5.2 Display Parameters

Scan Result
When this parameter is enabled, the type of bar code and the result of the scan
appear on the screen. Note that this information is only displayed after a successful
decode and is visible only while the scanner trigger is pressed. When the trigger is
released, this information is cleared from the screen.
Scan Indicator
When this parameter is enabled, the laser warning logo appears on the display
whenever the scanner is activated.
Scan Result Time (sec)
The value assigned to the "Scan Result Time (sec)" parameter determines how long
the scan results of a successful scan are displayed on the screen. Time is measured in
seconds, and a value of "0" (zero) disables the parameter. When you choose this
option, a dialog box appears where you can enter a value.
Note: To remove the scan result from the screen before the "Result Time" has
expired, point the scanner away from the bar code and press the trigger.
Good Scan Beep And Bad Scan Beep
These parameters determine whether or not the hand-held emits an audible scanner
'beep' when a good (successful) scan or a bad (unsuccessful) scan is performed. Set
these parameters to either on to enable the beeper or off to disable it.
196 WORKABOUT PRO Hand-Held Computer With Windows Mobile 6 Classic & Professional User Manual