Psion Teklogix Vehicle-Mount Computer 8515 User Manual page 89

SNMP
SNMP (Simple Network Management Protocol) is the protocol used to monitor and
manage devices attached to a TCP/IP network.
Storage Manager
Allows the user to view information about the storage devices that are present, such as
the CF card. For details, see
Stylus
Adjusts how Windows Embedded CE 5.0 recognizes your double-tap (as slow or rapid
successive taps).
Under the Calibration tab, you can recalibrate your touchscreen by tapping on the Rec-
alibrate button and following the directions on the calibration screen.
System
Displays system and memory properties. Under the Memory tab, you can allocate
memory between storage memory and program memory.
Teklogix Scanners
Used to set up some scanner parameters. However, the 8515 supports decoded scanners,
which must be configured by scanning special configuration bar codes (see
Total Recall
This is a Psion Teklogix utility developed to maintain applications and setting over cold
boots. This utility is based on a backup and restore concept and is extended to incorpo-
rate powerful advanced features.
TweakIT Settings
Allows you to change Advanced System Settings (interface, network, and servers), User
System Settings (display font size), and provides the Registry Editor.
Volume & Sounds
Allows you to adjust the volume of the beep that is emitted to indicate events like warn-
ings, key clicks and screen taps. Sounds (wave files) cannot be played on 8515 units.
The beeper volume and the conditions under which it sounds are tailored from within
the application installed on your unit.
Wireless WAN
Provides access to technology like GSM/GPRS and CDMA which allows wide area
networking capability such as internet browsing via GSM/GPRS.
page 98.
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 5: Configuration
Control Panel Icons
page 109).
69