Enabling Authentication Traps; Adding A Destination; Changing A Destination; Removing A Trap Destination - Psion Teklogix Vehicle-Mount Computer 8515 User Manual

5.18.3.1 Enabling Authentication TRAPS

Checking Enable Authentication TRAPS allows authorization traps to be sent when a
failure is detected (e.g., an SNMP message received with a bad community name).

5.18.3.2 Adding A Destination

• To add a new destination, tap on the Add button.
Figure 5.77 Add IP Address Dialog
• Type a destination in the text box provided, and press [ENTER].

5.18.3.3 Changing A Destination

To change an existing trap destination:
• Highlight the destination you want to alter in the Trap Destination tab, and then tap on
the Change button.
A dialog box like the one displayed when you add a destination is displayed.
Figure 5.78 Change IP Address Dialog
• Make the changes to the destination, and tap on OK to save the changes.

5.18.3.4 Removing A Trap Destination

To remove a trap destination:
• In the Trap Destination tab, highlight the destination you want to delete.
Psion Teklogix 8515 Vehicle-Mount Computer User Manual
Chapter 5: Configuration
Trap Destination Tab
119