The Devices Tab; Scan - Psion Teklogix Vehicle-Mount Computer 8515 User Manual

Chapter 5: Configuration

The Devices Tab

The Bluetooth Manager dialog box is used to display the other Bluetooth devices with
which you can communicate.
5.12.1

The Devices Tab

Note:
Figure 5.34 Devices Tab

5.12.1.1 Scan

• Tap on the Scan button to list available devices.
Figure 5.35 Scan
Wait for the 8515 to complete its scan (approximately 20 seconds). When scanning starts,
the Scan button will change to Stop—if necessary, you can tap on this button to stop the
process. Once scanning is complete, all discovered devices will be displayed in the list box,
with Name, Address, Active status, and PIN information.
92 Psion Teklogix 8515 Vehicle-Mount Computer User Manual
If you intend to configure Bluetooth communication with specific devices
(e.g., a scanner, printer, or headset), turn on the devices and bring them within
5 meters of the vehicle-mount before proceeding with the discovery process
described below.