Fixing The Cs To A Holder And Pole - Leica Geosystems Viva TPS Getting Started Manual

1.7
Components of the
GHT62 holder
Fixing the CS field
controller and
GHT62 to a pole
step-by-step
Viva TPS, Equipment

Fixing the CS to a Holder and Pole

The GHT62 holder consists of some components, as shown in the diagram.
a
b
c
TS_058
Step Description
If you use the CS15 field controller, extend the mounting plate of the holder
first.
For an aluminium pole, fit the plastic sleeve to the pole clamp.
1. Insert the pole into the clamp hole.
GHT63 clamp
d
a) Plastic sleeve
e
b) Pole clamp
c) Clamp bolt
f GHT62 holder
d) Locking pin
g
e) Top clip
h
f) Mounting plate (extendable)
i
g) Bottom clip
h) Tightening screw
i) Mounting arm
19