Leica Geosystems Viva TPS Getting Started Manual page 20

Viva TPS, Equipment
Step Description
2. Attach the holder to the clamp using the clamp bolt.
3. Adjust the angle and the height of the holder on the pole to a comfortable
position.
4. Tighten the clamp with the clamp bolt.
5. Before the CS field controller is
placed onto the mounting plate,
ensure that the locking pin is put
into the unlocked position. To
unlock the locking pin, push the
locking pin to the left.
6. Hold the CS field controller above the holder and lower the end of the CS
field controller into the mounting plate.
TS_055
20