Leica Geosystems Viva TPS Getting Started Manual page 53

Viva TPS, Applications
Setting the station point
Station point from: Select GPS - SmartStation.
•
Instrument height: Enter the height of the
•
instrument station.
Ensure that the GS15 instrument is connected to
the CS field controller and the correct antenna type
is set. This will ensure the vertical offset between
the TPS and GS15 instrument is accounted for.
OK to access the GPS Survey screen.
•
Measuring the station point
Meas to start the point measurement.
•
Stop to end the point measurement.
•
Store to store the point information.
•
53