DeAGNOSTINI MODEL SPACE Red Bull Racing RB7 Manual page 31

Red Bull Racing RB7: Step by Step
19
When you are happy with the fit,
remove the part and apply glue
to the edges marked with the dotted
green lines.
21
Repeat Steps 18 to 20 to attach the
right air inlet.
20
Now place the part back in position on your assembly, making sure there are no
gaps between them. When neatly in place, press the parts together with your
fingers and hold for a few minutes until they remain in place on their own.
22
When the parts are secure, you can place the bodywork onto your model, as shown.
This stage is now complete.
459
™