Nose And Front Wing - DeAGNOSTINI MODEL SPACE Red Bull Racing RB7 Manual

Radio controlled, build it yourself, nitro engine
Hide thumbs Also See for Red Bull Racing RB7:
Table of Contents

Advertisement

Red Bull Racing RB7: Step by Step
20
Slide the nose camera backwards
(red arrows) until it sits in the
position shown in the photo.
23
Next, position the upper nose
supplied with Stage 84 onto the
lower nose, so that it sits neatly behind
the nose tip, as shown by the red arrow.
21
Carefully lower the nose tip onto
the nose camera.
24
This stage is done, and the nose and front wing assembly of your RB7 is complete,
and ready to be fastened onto the front of the chassis at a later stage. Store the
assembly away safely until next time.
444
22
The nose tip should sit neatly at
the front of the lower nose, with
the curved sides of the nose camera
fitting snugly on each side.

Advertisement

Table of Contents
loading

Table of Contents