Programming; Programming: Entering Tenant Information - Aiphone GT SERIES Quick Start Installation Manual

Multi-tenant entry security

Hide thumbs Also See for GT SERIES:

Table of Contents

PROGRAMMING:

The GT-DMB(-N, -LVN), GT-MKB-N, and modular digital entrance stations must be programmed with the resident's

information before tenant stations can be addressed. The resident's information can be entered using the keypad or by

using the GT Setup Tool software.

Programming entrance stations using the GT Setup Tool for Windows

Step 1:

Open the GT Setup Tool and click the Create new site radio button. If already in the program, under File,

select Create new site(N).

Step 2:

Leave the standard options as shown, then click Next .

Step 3:

Enter a Site Name and indicate if GT-MCX or GT-BCXB will be used. From the drop down menu, select the

Number of Guard and the Number of Entrances, then click OK .

Step 4:

Click the + Entrance to show all entrance stations, then select the entrance station (DMB/DB1) to program.

Click Resident. Enter a Unit # (required) and Resident Name (not required, but must type in all Caps).

Step 5:

Click Save

ENTERING TENANT INFORMATION

, and then Yes .

Table of Contents

Show Quick Links

Table of Contents