Table of Contents
Advertisement
Entrance station
(modular type)
Thank you for selecting Aiphone for your communication needs. Please read this manual carefully before installation, and keep this in a safe
place for future reference.
Please note that images and illustrations depicted in this manual may differ from the actual product.
GT SYSTEM
Entrance station (modular type)
Entrance station (all-in-one type)
Guard station
OPERATION MANUAL
Entrance station
(all-in-one type)
1
2
3
B
E
4
5
6
H
K
N
7
8
9
U
0
Guard station
ZOOM
ADJUST
WIDE
Advertisement
Table of Contents
Related Manuals for Aiphone GT-DMB-N
Summary of Contents for Aiphone GT-DMB-N
- Page 1 ADJUST WIDE Thank you for selecting Aiphone for your communication needs. Please read this manual carefully before installation, and keep this in a safe place for future reference. Please note that images and illustrations depicted in this manual may differ from the actual product.
-
Page 2: Precautions
• This system is not intended for life support or crime prevention. It is just a 4. During an electrical storm, do not touch the unit. Electric shock could supplementary means of conveying information. Aiphone will under no result. conditions be liable for loss of life or property which occurs while the 5. -
Page 3: Table Of Contents
5 WARRANTY ..............58 Calling with the name scrolling module ....9 Calling with the 10 key module ......10 Calling with the all-in-one type entrance station (GT-DMB-LVN/GT-DMB-N) ......12 2-2 Door release ............. 16 2-3 Other ................ 16 GUARD STATION 1 PART NAMES AND FUNCTIONS ...... -
Page 4: Read This Before Using The Stations
(GT-2H-L/GT-2H) GT-1C7 GT-1M3 Tenant building Tenant building Tenant building Entrance station Entrance station (modular type) (all-in-one type) GT-DMB-LVN/ GT-DMB-N Main building (administration offi ce) Entrance station (all-in-one type only) Guard station GT-DMB-LVN/ GT-MKB-N GT-DMB-N Guard station GT-MKB-N - 4 -... -
Page 5: Notes About Using This Manual
READ THIS BEFORE USING THE STATIONS Coverage of calling, communication and monitoring The following table shows the coverage of calling, communication, and monitoring from a tenant building and a main building. ✓ NOTE: Performance depends on the settings. If you cannot call even when is indicated, its setting is not confi... -
Page 6: Entrance Station
ENTRANCE STATION PART NAMES AND FUNCTIONS Entrance station (modular type) Camera module Name scrolling module GT-VB GT-NSB Display Back search button (or move the cursor to the left) Forward search button Camera (or move the cursor to the right) Call button (or set and move forward) Illuminator LED Cancel button (or back) Audio module... -
Page 7: Entrance Station (All-In-One Type)
(If the sensor detects an object, the display will be illuminated.) All-in-one entrance station GT-DMB-LVN (VIGIK and NFC capable, Hearing aid compatible) Each part and indicator are the same as GT-DMB-N except as shown below (VIGIK). VIGIK (available in France) - 7 -... -
Page 8: Indicators
ENTRANCE STATION Indicators Entrance station (modular type) Entrance station (all-in-one type) Indication patterns Indicator IN USE LED Call Talk Door Display Status (orange) indicator indicator release indicator Standby (*3) W E L C O M E System in use I N U S E ( * 1) Call (*3) -
Page 9: Operations
ENTRANCE STATION OPERATIONS : Main building/section : Tenant building/section Calling a resident/tenant or guard station Calling with the call switch module Calling with the name scrolling module ■ Searching for a unit by scrolling the list Press the call button for the unit to be called. In standby mode, press to display the target unit # and resident name. -
Page 10: Calling With The 10 Key Module
ENTRANCE STATION ■ Searching for a unit by entering resident Calling with the 10 key module name 10-key In standby mode, press on the 10-key. ■ Searching for a unit by entering the unit # When "ENTER A LETTER" is displayed, enter a letter using the 10-key to display the target unit # In standby mode, enter the numbers using [0] to and resident name. - Page 11 ENTRANCE STATION When the target unit # or resident name is displayed, press The call indicator will light up and you will hear a call tone. Audio guidance will be heard depending on the settings. When the call is answered Communication starts and the talk indicator lights up.
-
Page 12: Calling With The All-In-One Type Entrance Station (Gt-Dmb-Lvn/Gt-Dmb-N)
ENTRANCE STATION Calling with the all-in-one type entrance station GT-DMB-LVN/GT-DMB-N The following diagram shows the screen transitions starting from the standby screen. One of the standby screens shown below is preset to this station. Find the standby screen of this station from below and confi... - Page 13 HOW TO CALL Up to 4 units can be displayed. 1. ENTER UNIT # INFORMATION 2. CALL SMITH Unit # AIPHONE DENTIST LAINE When the target unit number is numerals NUMBER ALPHA Resident name only...
- Page 14 ENTRANCE STATION Searching for a building in the building list How to enter letters and entering unit # (e.g.) Entering "CATHY" HOW TO CALL 1. To enter "C", press three times. 1.BUILDING LIST (*1) 2. Press once. 2.SELECT 3.ENTER UNIT # 3.
- Page 15 ENTRANCE STATION Entering a building # and unit # When the target unit is successfully called HOW TO CALL The call indicator will light up and you will hear 1.ENTER BLDG# 2.SELECT a call tone. 3.ENTER UNIT # Audio guidance will be heard depending on the settings. 4.CALL When the call is answered In standby mode, enter numbers or letters using...
-
Page 16: Door Release
ENTRANCE STATION Door release ■ Door release by using the access code ■ Door release by an NFC-compliant IC card, etc. The access code is preset by the system installer or administrator. A card incorporated with an NFC tag can be used to release a door. To use, the ID of the NFC tag must be registered as a door release In standby mode, enter [#] and then the access code. -
Page 17: Guard Station
GUARD STATION PART NAMES AND FUNCTIONS Operation panel Color LCD monitor (Display) Status LED (orange) Handset Speaker Indicates the current status of this station by lighting up or fl ashing on/off Multi-function buttons in orange (while initializing the system, • being called, communicating, etc.). -
Page 18: Indicators
GUARD STATION Indicators ZOOM ADJUST WIDE Indication patterns Indicator Status LED (orange) Status Standby Standby Long interval flashing (Call tone volume: off) (5.5 sec.) (0.5 sec.) Standby Slow flashing (Reception mode: on) (0.5 sec.) (2.5 sec.) This station is in use by another station (this station is inoperable) Being called by an entrance station Fast flashing... -
Page 19: Lcd (Display)
Information display Displays the unit # or resident name of selected station, operation method, etc. NAME SEARCH 1 / 8 SMITH AIPHONE DENTIST LAINE MENIN List of units The list of units you searched for is shown here by their unit # and resident names. Nothing appears in the list when no corresponding unit is detected. -
Page 20: Button Operations
GUARD STATION Button operations ■ Multi-function buttons and icons The functions to be performed by the multi-function buttons are displayed by icons just above the buttons. Multi-function buttons Functions shown by icons here can be performed by When the same icon as the icon above a button is pressing the buttons just below the icons. - Page 21 GUARD STATION ■ How to enter numbers and letters by using the 10-key (0 to 9, , #) Use the 10-key in the number or letter entry mode. The number and letter entry modes can be switched by pressing Number entry mode UNIT # Entered numbers are displayed.
-
Page 22: Receiving A Call
GUARD STATION RECEIVING A CALL : Main building/section : Tenant building/section Receiving a call When receiving a call, the call tone sounds and the number and name of the caller (station) are displayed in the screen. ZOOM WIDE ADJUST Caller The caller can be confi... -
Page 23: Calling (From A Tenant Building)
(→ UNIT BY NUMBER NUMBER SEARCH SMITH UNIT BY NUMBER 1 / 4 1 / 1 UNIT BY NAME SMITH SMITH GUARD STATION AIPHONE AIPHONE ENTRANCE DENTIST DENTIST YOKOI LAINE YABE MENIN • Searching by number (UNIT BY NUMBER) (→... -
Page 24: Calling A Unit (Residential/Tenant Station) Or Guard Station
• If both unit # 111 and 1111 exist, the resident name for unit 111 SMITH will be displayed when 1, 1, 1 is entered, and the resident name AIPHONE DENTIST for unit 1111 will be displayed if 1 is entered one more time. - Page 25 WIDE Selected unit # and resident name SMITH ZOOM 1 / 1 ADJUS WIDE SMITH AIPHONE DENTIST LAINE MENIN Unit # and resident names are displayed in alphabetical or numerical order. * The arranging method differs depending on the setting.
- Page 26 Enter numbers using [0] to [9] on the 10-key to display the target unit # and resident name. Entered unit # NUMBER SEARCH 1 / 4 SMITH AIPHONE DENTIST YOKOI YABE Unit # whose initial number matches the entered number are displayed in the list.
- Page 27 10-key to display the target resident name. Entered character NAME SEARCH 1 / 1 AIPHONE The unit # and resident names whose initial letter matches the entered letter are displayed in the list. (e.g.) When "A" is entered, 301A, 1003ABC, ABC, etc.
- Page 28 GUARD STATION Searching for a guard station from the guard Searching for an entrance station station list (→ ZOOM Select "GUARD STATION" by pressing WIDE ZOOM ZOOM WIDE WIDE NOTES: GUARD STATION • Communication will end automatically after approximately 3 minutes.
-
Page 29: Calling An Entrance Station
GUARD STATION Calling an entrance station Direct calling an entrance station Press (only when is displayed in standby The search item list is displayed. mode) When is displayed, press ZOOM The preset entrance station is called, and then communication is ADJUST WIDE enabled. - Page 30 GUARD STATION Transferring video image taken by an entrance station camera or surveillance camera to a residential/tenant station (only when is displayed in standby mode) Press Select a residential/tenant station by one of the following methods ZOOM ZOOM ZOOM Press ) and then WIDE WIDE...
-
Page 31: Calling (From A Main Building)
Entering unit # (→ BUILDING 1 / 4 B- 3 GUARD STATION ENTRANCE SMITH Searching for a AIPHONE building in the list + DENTIST unit # (→ YOKOI YABE B- 4 Entering a building # + unit # (→ •... -
Page 32: Calling A Room (Residential/Tenant Station) Or Guard Station
To end communication, press or hang up handset. 1 / 4 SMITH NOTES: AIPHONE DENTIST • Communication will end automatically after approximately 3 YOKOI minutes. Communication with a residential/tenant station in YABE hands-free mode ends automatically after 1 minute in hands-free mode. - Page 33 ZOOM Enter the resident name using [0] to [9] on 1 / 1 ADJUS WIDE SMITH the 10-key. AIPHONE DENTIST How to enter letters (→P. 21). LAINE MENIN Entered number is displayed. UNIT # Unit # and names are displayed in alphabetical or numerical order.
- Page 34 GUARD STATION Searching for a building in the list + Entering a building # + unit # entering unit # ZOOM ZOOM ZOOM In standby mode, press WIDE WIDE WIDE ZOOM ZOOM ZOOM In standby mode, press "BUILDING #" screen is displayed. WIDE WIDE WIDE...
- Page 35 GUARD STATION Entering a building # + unit # Searching for a unit by using the search item list Press Searching for a building in the list + entering The search item list is displayed. unit # ZOOM ZOOM ZOOM Select "BUILDING"...
- Page 36 GUARD STATION Searching for a guard station from the guard ZOOM Select the target guard station by pressing WIDE station list ZOOM ZOOM WIDE WIDE Press The search item list is displayed. CENTRAL TOWER ZOOM Select "GUARD STATION" by pressing GUARD1 WIDE ZOOM...
-
Page 37: Calling An Entrance Station
GUARD STATION Calling an entrance station Select the target entrance station. Press Selected entrance station number and name The search item list is displayed. 0001 ENTRANCE1 ZOOM 1 / 1 ADJUS WIDE ZOOM 0001 ENTRANCE1 ADJUST WIDE 0002 ENTRANCE2 0003 ENTRANCE3 0004 ENTRANCE4... - Page 38 GUARD STATION Direct calling an entrance station Transferring video image taken by an entrance station camera or surveillance (only when is displayed in standby camera to a residential/tenant station mode) (only when is displayed in standby mode) When is displayed, press The preset entrance station is called, and then communication is Press enabled.
-
Page 39: Operations During Communication
GUARD STATION OPERATIONS DURING COMMUNICATION Transferring a call Door release A call from an entrance station can be transferred to a residential/ tenant station via a guard station While receiving a call or communicating with an entrance station, press After the guard station is called from an entrance ZOOM ADJUST WIDE... -
Page 40: Operating An Optional Device
GUARD STATION Operating an optional device You can operate an optional device such as a light on this station. Press ZOOM ADJUST WIDE The optional device turns on. NOTES: • A signal is sent to the device installed in the site. Please refer to the specifi... -
Page 41: Viewing And Adjusting Video At An Entrance Station
GUARD STATION Viewing and adjusting video at an entrance station You can view video at the target station when receiving a call from or Pan & Tilt communicating with an entrance station with a camera, or monitoring it. The video can be adjusted as desired by using the following ZOOM ZOOM ZOOM... - Page 42 GUARD STATION Adjusting screen view If the video on the screen is diffi cult to see, you can adjust the screen view. Press when the video is diffi cult to see. ADJUST ZOOM ADJUST WIDE The backlight or night sensitivity is automatically adjusted. The discrimination between day and night is performed automatically by this station.
-
Page 43: Monitoring
GUARD STATION MONITORING You can monitor an entrance station or door station. When monitoring an entrance station or door station with a Press camera, you can view the video at the station and hear the sound. The monitoring function is not available for an entrance station or The sound at the station is heard, and the video is displayed on the screen. - Page 44 GUARD STATION Monitoring from a main building Select the target entrance station. Selected entrance station number and name For monitoring a door station, start from step 0001 ENTRANCE1 In standby mode, press ZOOM 1 / 1 ADJUS WIDE 0001 ENTRANCE1 The search item list is displayed.
-
Page 45: Other Operations
Selected unit # and name Flashes. * On a guard station in a main section, the building #, building name, and unit # of the selected unit are displayed. MISSED CALLS ZOOM AIPHONE ZOOM 1 / 1 ADJUST WIDE SMITH AIPHONE... -
Page 46: Receiving An Emergency Call
GUARD STATION Receiving an emergency call When an emergency alarm switch is locked (or when a wire disconnection occurs), an alarm sounds and an "EMERGENCY" To end communication, press or hang screen is displayed on this station. Check for the unit that sent the up handset. - Page 47 GUARD STATION To display a record of emergency calls NAME SEARCH EMERGENCY ZOOM WIDE NAME SEARCH MISSED CALLS Flashes when there is one or more unchecked emergency calls. ZOOM Press In standby mode. WIDE A record of emergency calls is displayed. To call a room that sent the emergency call ZOOM ZOOM...
-
Page 48: Setting
GUARD STATION SETTING Adjusting display brightness and volumes Adjusting brightness of the display Adjusting the call tone volume You can adjust the call tone volume at this station. In standby mode, press In standby mode, press The SETTINGS screen is displayed. ZOOM ZOOM Select "TONE VOLUME"... - Page 49 GUARD STATION Adjusting the receive volume You can adjust the speaker volume of this station. In standby mode, press The SETTINGS screen is displayed. ZOOM Select "RECEIVE VOLUME" by pressing WIDE ZOOM ZOOM WIDE WIDE SETTINGS BRIGHTNESS TONE VOLUME ZOOM ADJUS WIDE RECEIVE VOLUME...
-
Page 50: Switching To Reception Mode
GUARD STATION Switching to reception mode This section describes the reception mode and how to confi gure it. Switching this station between normal mode Refer to steps 2 to 3 of " Transferring a call" for the and reception mode operating procedure. -
Page 51: Switching To Program Mode
GUARD STATION Switching to program mode * This operation is for Administrators and Managers only Entering a passcord is needed to switch this station into program mode. Ask the system installer for the passcord. A registered NFC-compliant IC card can be used instead of a passcord. -
Page 52: Updating Resident Information
• For multi building system (→ GT SYSTEM SETTING MANUAL/Multi Building System) When using an Android device (→ GT SYSTEM SETTING MANUAL/Aiphone GT Setup Tool for Android) Android is a trademark of Google Inc. in the United States and/or other countries. -
Page 53: For Proper Use Of This Station
FOR PROPER USE OF THIS STATION TECHNICAL PRECAUTIONS [For guard station only] • Cleaning: • The video image may distort when door release is activated. This Clean the units with a soft cloth dampened with a neutral is not a station malfunction. household cleanser. -
Page 54: Specifications
FOR PROPER USE OF THIS STATION SPECIFICATIONS 1-call button panel (GF-1P)/2-call button panel (GF-2P)/ Entrance station (modular type) 3-call button panel (GF-3P)/4-call button panel (GF-4P) Camera module (GT-VB) Panel: Zinc die cast Material Window: Polycarbonate Power source Supplied from GT-VBC Bottom: Chrome plated zinc die cast Ambient temperature - 10°C - +60°C (+14°F - +140°F) -
Page 55: Door Station
Case: Self-extinguishing ABS resin Panel: Stainless steel with hairline fi nishing Color Case: Black GT-DMB-N: 150 (W) x 320 (H) x 38.5 (D) mm 5-7/8" (W) x 12-5/8" (H) x 1-1/2" (D) Dimensions GT-DMB-LVN: 150 (W) x 425 (H) x 38.5 (D) mm 5-7/8"... -
Page 56: Software License
■ Please understand that we cannot answer questions regarding the content of the source code of the software components. BSD License Copyright (c) 2017, AIPHONE CO.,LTD All rights reserved. Redistribution and use in source and binary forms, with or without modifi cation, are permitted provided that the following conditions are met: 1. -
Page 57: Regulations
FOR PROPER USE OF THIS STATION REGULATIONS This device complies with part 15 of the FCC Rules. Operation is Hereby, Aiphone Co., Ltd. declares that the radio equipment type subject to the following two conditions: (1) This device may not [GT-DB-VN, GT-DMB-N, GT-DMB-LVN, GT-MKB-N, GT- cause harmful interference, and (2) this device must accept any BCXB-N] is in compliance with Directive 2014/53/EU. -
Page 58: Warranty
WARRANTY Aiphone warrants its products to be free from defects of material and workmanship under normal use and service for a period of 2 years after delivery to the ultimate user and will repair free of charge or replace at no charge, should it become defective upon which examination shall disclose to be defective and under warranty.