Promise Technology UltraTrak100 TX4 User Manual page 40

UltraTrak100 TX4 and UltraTrak100 TX8 User Manual
When using ID mode, if you have multiple arrays within an UltraTrak100 unit, each
array will use a separate SCSI ID. When using LUN mode, each UltraTrak100 unit
will use a single SCSI ID, with the first array being LUN 0, the second array being
LUN1, etc. Enable Multiple LUN support in your SCSI adapter if you choose LUN
mode. In most cases it is preferable to use ID mode.
SCSI ID
Select a SCSI ID between 0 and 15:
0
1
2
...
15
What you can do:
Press SEL:
from a list of numbers
between 1 and 15.
Press :
Press :
Press EXIT:
If you have multiple arrays and are using ID mode, be aware that each
array will use a SCSI ID. If, for example, you have created two separate
arrays and have selected SCSI ID 4, array 1 would have SCSI ID 4 and
array 2 would have SCSI ID 5.
34
Selected
Selects one of the following active functions:
Selects the SCSI ID – The word Selected appears next
to the selected ID.
Moves the active message line up. (Active is marked by *.)
Moves the active message line down. (Active is marked by *.)
Returns to the Configure SCSI menu.
Press or to move these items on the LCD.
Note