Promise Technology UltraTrak100 TX4 User Manual page 36

UltraTrak100 TX4 and UltraTrak100 TX8 User Manual
A F
DVANCED EATURE
Wipe out disk
Synchronize Array
Disable Buzzer
Rebuild/Sync Pri.
What you can do:
Press SEL:
Wipe out disk
Synchronize Array
Disable Buzzer
Press :
Press :
Press EXIT:
W O D
IPE UT ISK
The Wipe Out Disk menu allows the user to delete the area on the hard drive that
contains array information used exclusively by the UltraTrak100 controller. It may
be necessary to wipe out a disk if the disk was previously a member of an
UltraTrak100 array and you wish to use the disk in a different UltraTrak100 array.
To wipe out a disk, go to the Configuration menu and select Configure Array;
then select Advance Features and choose Wipe Out Disk.
1 MAXTOR Asng In Ary 1
2 IBM Asng In Ary 2
3 MAXTOR Asng In Ary 3
4 IBM Asng In Ary 4
What you can do:
Press SEL:
Press :
Press :
Press EXIT:
The Wipe Out Disk option will delete all data on the drive that is
selected.
30
Selects one of the following active functions:
Moves the display to the Wipe out disk menu.
Moves the display to the Synchronize Array menu.
Pressing SEL toggles between Enable and Disable
Moves the active message line up. (Active is marked by *.)
Moves the active message line down. (Active is marked by *.)
Returns to the Configure Array menu.
Displays a Wipe out disk confirmation message.
Moves the active message line up. (Active is marked by *.)
Moves the active message line down. (Active is marked by *.)
Returns to the Advance Feature menu.
Press or to move these items on the LCD.
Where the values shown are simply examples.
Press or to move these items on the LCD.
Caution