Configure SCSI
ID
LUN
List SCSI IDs 0 thru
15 to be selected
from.
C
SCSI
ONFIGURE
The Configure SCSI menu will allow the setting of SCSI parameters. The following
parameters are set in the configure SCSI menu:
Mode
SCSI ID
What you can do:
Press SEL:
Mode
SCSI ID
Press
:
Press
:
Press EXIT:
M
ODE
Select one of the following SCSI ID modes:
ID
Selected
LUN
What you can do:
Press SEL:
ID
LUN
Press
:
Press
:
Press EXIT:
Mode
SCSI ID
Selects one of the following active functions:
Move the display to the Mode menu.
Move the display to the SCSI ID menu.
Moves the active message line up. (Active is marked by *.)
Moves the active message line down. (Active is marked by *.)
Returns to the Configuration menu.
Selects one of the following active functions:
Select device ID mode.
Select LUN (logical unit number) mode.
Moves the active message line up. (Active is marked by *.)
Moves the active message line down. (Active is marked by *.)
Returns to the Configure SCSI menu.
See below
See page 34
Selected toggles between these two when SEL is
pressed.
33