Table of Contents
Advertisement
FastTrak TX4000 User Manual
FastBuild (tm) Utility 1.xx (c) 2002-2005 Promise Technology, Inc.
Array No
Array 2
Stripe Block: Not Available
Channel:
Drive ID
1 :
[ ] Up [ ] Down
11.
Under Select Drive for Rebuild, highlight the replacement drive.
12.
Press Enter and confirm that the data will be copied on to the selected
drive. All data on the replacement drive will be written over with mirrored
information from the array drive. A progress bar will appear as below.
Please Wait While Duplicating The Image
Complete
13.
Once the rebuild process is complete, reboot the system.
[ Rebuild Array Menu ]
RAID Mode
Mirror
[ Select Drive for Rebuild ]
Drive Model
1
QUANTUMCR8.4A
[ Keys Available ]
[ESC] Exit
[Enter] Select
Total Drv
2
Gigabyte Boundary: ON
32
Status
Critical
Capacity (MB)
8063
10%
Advertisement
Table of Contents
