Channel: Drive ID
Channel: Drive ID
Channel: Drive ID
1 :
3 :
4.
Press the arrow keys to choose which drive contains the existing data to be
copied.
5.
Press Ctrl-Y to Save selection and start duplication. The following progress
screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6.
Select Y to continue. If you choose N, you will be returned to step 1.
7.
Once complete, the following screen will appear confirming that your
Security array has been created. Press any key to reboot the system.
8.
Proceed to Chapter 4: Installing Drivers to install the FastTrak TX4000
driver and/or operating system.
Source Disk
Drive Model
Target Disk
Drive Model
[Please Select A Source Disk]
Drive Model
1
QUANTUMCR8.4A
3
QUANTUMCR8.4A
[ ] Up [ ] [ESC] Exit [Ctrl-Y] Save
Array has been created.
<Press Any Key to Reboot>
13
Chapter 2: Quick Start
Capacity (MB)
Capacity (MB)
Capacity (MB)
8063
8063