Promise Technology FastTrak TX4000 User Manual page 30

FastTrak TX4000 User Manual
Channel:
Channel:
Channel:
1 :
3 :
[ ] Up [ ] [ESC] Exit [Ctrl-Y] Save
4.
Press the arrow keys to choose which drive contains the existing data to be
copied.
All target drive data will be erased. Make sure you choose
the correct drive.
5.
Press Ctrl-Y to Save selection and start duplication. The following
confirmation screen will appear.
Start to duplicate the image . . .
Do you want to continue? (Yes/No)
Y – Continue N - Abort
6.
Select Y to continue. If you choose N, you will be returned to step 1.
7.
Once you select Y, the following progress screen will appear. The process
will take a few minutes.
Please Wait While Duplicating The Image
Complete
Once mirroring is complete, the following screen will appear confirming that
your Security array has been created.
8.
Press any key to reboot the system.
Source Disk
Drive ID Drive Model
Target Disk
Drive ID Drive Model
[Please Select A Source Disk]
Drive ID Drive Model
1 QUANTUMCR8.4A
3 QUANTUMCR8.4A
Array has been created.
<Press Any Key to Reboot>
Capacity (MB)
Capacity (MB)
Capacity (MB)
Warning
26
8063
8063
10%