Industrial Scientific Tango TX1 Product Manual page 34

Table 4.2 Operation instruction
Screen
Buttons
Initiate zero
Initiate bump test
Peak reading
TWA reading
STEL reading
Screen description
Button effects
This display screen is activated if the unit is enabled for operation-mode zeroing. It features the
check mark and zero icons.
Starts the zero process (see "Zero, Calibration, and Bump Testing").
Activates the next enabled operation-mode screen.
This display screen is activated if the unit is enabled for operation-mode bump testing. The screen
features the check mark and bump test icons.
Starts the bump test process (see "Zero, Calibration, and Bump Testing").
Activates the next enabled operation-mode screen.
This display screen features the check mark, peak, and sensor-type icons, and the most recent
peak reading.
Clears the peak reading.
Activates the next enabled operation-mode screen.
This display screen is activated if this feature is operation-mode enabled. The screen features the
check mark, sensor-type, and TWA icons, and the current TWA reading.
Clears the TWA reading.
Activates the next enabled operation-mode screen.
This display screen is activated if this feature is operation-mode enabled. The screen features the
check mark, sensor-type, and STEL icons, and the current STEL reading.
Clears the STEL reading.
Activates the next enabled operation-mode screen.
30