Table of Contents
Advertisement
20
Confirm:
Fig. 5.10. The prompt will appear if you have typed in the wrong password in the Confirm Password field
Fig. 5.11. Enter your user defined password to read from and write to the NetGuardian 216
Speaker Enabled: Enables audible notification of alarms when box is checked. Speaker is enabled by default.
Note: The speaker follows DCP reporting when the DCP channel is enabled, and follows dial-up reporting when
DCP is disabled. The speaker is off when both channels are disabled, or the enable speaker check box is not
selected.
5.6
Editor Channel Tab
In the Channel tab, you can configure your DCP and Dial-up channels. You have the option to turn any channel
off if you are not using it.
The confirmation password must be entered before you may write to the NetGuardian
216. The confirmation check is designed to prevent accidentally mistyping and writing
an incorrect password. If you enter the wrong password, a prompt will appear — see
Figure 5.10.
Fig. 5.12. The Channel tab
Advertisement
Table of Contents
Need help?
Do you have a question about the NetGuardian 216 DCP and is the answer not in the manual?
Questions and answers