Configuration; T/Ng216-Dialup; Installing T/Ng216-Dialup - DPS Telecom NetGuardian 216 DCP User Manual

5

Configuration

5.1

T/NG216-Dialup

T/NG216-Dialup is a Windows utility that provides a single uniform interface for all the functions of the unit.
Using T/NG216-Dialup, you can monitor alarm points, control relays, monitor analog values, analyze network
traffic between the NetGuardian and its alarm collection master, and load firmware updates.
Operating System: Windows 9x, NT, ME, 2000 or XP.
Recommended Processor Speed: 333 MHz.
Recommended Color Settings: 16 bit.
Note: T/NG216-Dialup may not work properly on slower machines if the display is set for 256 colors.
Recommended Resolution: 1024 x 768.

5.1.1 Installing T/NG216-Dialup

The T/NG216-Dialup software is on the CD-ROM included with your NetGuardian 216. The CD-ROM includes
a standard Windows setup program for easy installation.
To install T/NG216-Dialup on your PC, follow these steps:
1. Insert the T/NG216-Dialup software CD-ROM in the CD-ROM drive of your computer.
2. Double-click My Computer and double-click your CD-ROM drive icon (e.g. D:\) , or choose Run from the
Start menu and type your CD-ROM drive letter (e.g. D):\TNG216 (the folder file)\setup.exe.
3. Double-click the SETUP.EXE icon, which will launch the setup program. The setup program will offer to
install T/NG216-Dialup on your computer. Follow the instructions on your screen.
Fig. 4.18. Press the Ack button to acknowledge alarms
15