Overload Advance Notice Signal [Ol] - Hyundai N700E Instruction Manual

N700E INSTRUCTION MANUAL

Overload Advance Notice Signal [OL]

When the output current exceeds a preset value,
the [OL] terminal signal turns on.
The parameter C18 sets the overload threshold.
The overload detection circuit operates during powered
motor operation and during regenerative braking.
The output circuits use open-collector transistors,
and are active low.
Option Terminal
Code Symbol
3 OL
Valid for inputs:
Required setting
Notes:
• The default value is 100%.
To change the level from the default,
set C18 (overload level).
• The accuracy of this function is the same
as the function of the output current monitor on the
[FM] terminal
Function Name
Overload advance
notice signal
C13, C14, C18
3
Input
State
when output current is more than the set threshold
ON
for the overload signal.
when output current is less than the set threshold
OFF
for the overload signal.
5-18
Description