Control And Operation - Hyundai N700E Instruction Manual

Hide thumbs Also See for N700E:
Table of Contents

Advertisement

N700E INSTRUCTION MANUAL
General Safety Information

3. Control and operation

While the inverter is energized, be sure not to touch the main terminal or to check
the signal or add or remove wires and/or connectors.
Otherwise, there is a danger of electric shock.
Be sure to turn on the power supply with the front case is closed.
While the inverter is energized, be sure not to open the front case.
Otherwise, there is a danger of electric shock.
Be sure not to operate the switches with wet hands.
Otherwise, there is a danger of electric shock.
While the inverter is energized, be sure not to touch the inverter terminals even while the unit
is not running.
Otherwise, there is a danger of electric shock.
If the retry mode is selected, it may suddenly restart during the trip stop.
Be sure not to approach the equipment. (Be sure to design the equipment so that personnel
safety will be secured even if equipment restarts.)
Otherwise, there is a danger of injury.
Be sure not to select retry mode for equipment running up and down or traversing because
there is output free-running mode in term of retry.
Otherwise, there is a danger of injury and/or machine breakage.
Even if the power supply is cut for a short period of time, the inverter may restart operation
after the power supply is restored if the operation command is given.
If a restart may incur danger to personnel, be sure to make a circuit so that it will not restart
after power recovery.
Otherwise, there is a danger of injury.
The stop key is valid only when a function is on. Ensure that there is a hard wired emergency
stop that is separate from the stop key of the inverter.
Otherwise, there is a danger of injury.
With the operation command on, if the alarm reset is ordered, the inverter can restart
suddenly. Be sure to set the alarm reset after checking the operation command is off.
Otherwise, there is a danger of injury.
Be sure not to touch the inside of the energized inverter or to put a shorting bar into it.
Otherwise, there is a danger of electric shock and/or fire.
XII

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents