Using Intelligent Terminals; Intelligent Terminal Lists - Hyundai N700E Instruction Manual

N700E INSTRUCTION MANUAL

5. Using intelligent terminals

Intelligent terminal lists

5.1
Terminal Terminal
symbol name
Forward
FW
RUN/STOP
(0)
terminal
Reverse
RV
RUN/STOP
(1)
terminal
CF
(2)
CF
(3) Multi-speed
frequency
commanding
terminal
CF
(4)
CF
(5)
JG
Jogging
(6)
2-stage
2CH
acceleration
(8)
/deceleration
FRS
Free-run stop
(9)
EXT
External trip
(10)
USP Unattended start
(11) prevention
SFT Terminal soft-
(12) ware lock
AT Current input
(13) selection
RS
Reset
(14)
Signal source
CM1
for input
External power
supply terminal
P24
for input
1
2
3
4
Jogging operation
The acceleration or deceleration time is possible to change considering
the system.
The inverter stops the output and the motor enters the free- run state.
(coasting)
It is possible to enter the external trip state
Restart prevention when the power is turned on in the RUN state.
The data of all the parameters and functions except the output frequency is
locked.
The [AT] terminal selects the inverter uses the voltage [O] or current [OI]
input terminals for external frequency control.
If the inverter is in Trip Mode, the reset cancels the Trip Mode.
Common terminal for intelligent input terminals.
External power connection terminal for intelligent input terminals.
Description
5-1