7. Attach the Weight Rack (59) to the Uprights (38) as shown
with four Weight Rack Screws (56).
8. Attach the Storage Latch (66) to the left Upright (38) with
two 3/4" Screws (5) as shown. Do not overtighten the
Screws.
9. Make sure that all parts are properly tightened before you use the treadmill. Note: Extra hardware may
be included. Keep the included allen wrenches in a secure place; the large allen wrench is used to adjust the
walking belt (see page 17). To protect the floor or carpet, place a mat under the treadmill.
7
56
38
8
9
59
56
38
66
5