Emerson HIGHPOINT CF205GES01 Owner's Manual page 9

3. Ceiling Fan Assembly
3.11
Using the decorative rod screws (supplied), attach the
three decorative rod assemblies to the motor housing
(Figure 11). The decorative rods must be oriented so that
they lean in towards the downrod. Do not tighten the rod
screws at this time.
3.12
Slide the rod support assembly up the downrod until the
threaded holes in the rod support align with the holes in the
decorative rod assemblies (Figure 12). Secure the
decorative rods to the rod support using three decorative
rod screws; do not tighten the rod screws at this time.
Rotate the rod support assembly until the decorative rod
assemblies are aligned vertically with the downrod
(Figure 12). Hold the rod support in this position while
tightening all six decorative rod screws securely.
(Continued)
DECORATIVE
ROD ASSEMBLY
DECORATIVE
ROD SCREW
Figure 11
DOWNROD
DECORATIVE
ROD SCREW
DECORATIVE
ROD ASSEMBLY
Figure 12
9
ROD
SUPPORT
ASSEMBLY
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF205