How To Wire Your Ceiling Fan - Emerson HIGHPOINT CF205GES01 Owner's Manual

5. How to Wire Your Ceiling Fan

5.9
While inserting the receiver fully into the hanger bracket,
turn leads upward and carefully push leads into the outlet
box, with the white and green leads on one side of the
outlet box and position the black and blue leads on the
other side of the outlet box (Figure 25).
WARNING
!
Check to see that all connections are tight, including
ground, and that no bare wire is visible at the wire
connectors, except for the ground wire. Do not
operate fan until blades are in place. Noise and fan
damage could result.
5.10
Wiring Schematic for reference (Figure 26).
BLACK
(HOT)
TO
120-VOLT
SUPPLY
WHITE
Figure 26
STANDARD ON-OFF WALL
SWITCH OR OPTIONAL
SW406 WALL CONTROL
GROUND
TWO-CONDUCTOR
CABLE
(WITH GROUND)
GREEN WIRE (GROUND) FROM
HANGER BALL AND HANGER
BRACKET
Figure 25
BLACK
BLACK
WHITE
WHITE
RED
BLUE
BLACK
BLUE
WHITE
HANGER BALL
17
(Continued)
WIRE
CONNECTORS
(Tucked Inside
Outlet Box)
WHITE
emersonfans.com
Please contact 1-800-654-3545 for further assistance
U.L. Model No.: CF205