HP 9000 Installation Manual page 47

D class and r class internal peripherals enterprise servers

Hide thumbs Also See for 9000:

O. Replace the

1. Align the control panel bezel over the power switch and LCD display and push

Front Bezel

CAUTION

Until the LCD and power switch bezel is attached, the area surrounding the LCD is

ESD sensitive. See "Electrostatic Discharge Precautions" on page 2-2.

2. Align the front bezel over the front of the chassis and push gently to secure the

This completes the internal peripherals installation procedure. Proceed to the

Internal Peripherals installation Verification procedure starting on the next page.

gently to secure the bezel in place..

bezel in place.

R Class Internal Peripherals Installation

Installation Procedures

2- 17

Table of Contents