Adjustment/Maintenance - Kyocera FS-3640MFP Operation Manual

Setup, Registration, and User Management > System Menu

Adjustment/Maintenance

Adjust printing quality and conduct machine maintenance.
Item
Density Adjustment
Copy
Send/Box
Background Density Adj.
Copy (Auto)
Send/Box (Auto)
Toner Save Level (EcoPrint)
Copy
Printer
Print Density
Auto Color Correction
Correcting Black Line
Display Brightness
Downloaded from www.Manualslib.com
Adjust density.
Adjust copy density. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Adjust scan density when sending or storing the data in Document Box. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density adjustment.
Darkens or lightens overall background density adjustment during copying. Adjustment can be
made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Darkens or lightens overall background density when sending images or storing them in the
Document Box. Adjustment can be made in 7 levels.
Value: -3 (Lighter), -2, -1, 0 (Normal), +1, +2, +3 (Darker)
Set the toner-saving level when using EcoPrint.
Lowers or raises the toner-saving level during copying. Adjustment can be made in 5 levels.*
Value: 1 to 5
Lowers or raises the toner-saving level during printing. Adjustment can be made in 5 levels.
Value: 1 to 5
Adjust print density. Adjustment can be made in 5 levels.
Value: 1 to 5
This setting allows you to adjust the detection level used by the machine to determine whether
the original is color or black and white during Auto Color Mode. Setting a lower value will result
in more originals being identified as color, while a larger value will tend to increase the number
of originals being identified as black and white.
Value: 5 (B & W), 4, 3, 2, 1 (Color)
Correct fine lines (streaks caused by contamination), which may appear on the image, when
the document processor is used.
Value
Off: No correction performed.
On (Low): Correction performed. The reproduction of fine lines on the original may become
lighter than when using [Off].
On (High): Select this item if a streak remains after using [On (Low)]. The reproduction of fine
lines on the original may become lighter than when using [On (Low)].
Set the brightness of the touch panel.
Value: 1 (Darker), 2, 3, 4 (Lighter)
manuals search engine
Description
9-23