Interface Block Setting - Kyocera FS-3640MFP Operation Manual

Setup, Registration, and User Management > System Menu
IPSec
Item
IPSec
* After changing the setting, restart the system or turn the machine OFF and then ON.
Secure Protocol
Item
SSL
IPP Security
HTTP Security
LDAP Security (Ext. Address
Book)
LDAP Security (User Property)
* After changing the setting, restart the system or turn the machine OFF and then ON.
** LDAP must be set to [On] in Protocol Detail on page 9-19.
LAN Interface
Item
LAN Interface
* After changing the setting, restart the system or turn the machine OFF and then ON.

Interface Block Setting

This allows you to protect this machine by blocking the interface with external devices such as USB hosts or optional
interfaces.
Item
USB Host
USB Device
Optional Interface*
* Only on products with the fax function installed.
Downloaded from www.Manualslib.com
Make this setting when you use IPSec.*
Value: Off, On
Select whether or not to use SSL.*
Value: Off, On
Select the IPP security level. This setup is available when SSL is [On].*
Value: IPP/IPP over SSL, IPPoverSSL only
Select the HTTP security level. This setup is available when SSL is [On].*
Value: HTTP/HTTPS, HTTPS Only
Select the type of encryption according to the type of security employed by the LDAP server.
This setup is available when SSL is [On].*, **
Value: Off, LDAPv3/TLS, LDAP over SSL
Specify the settings for the LAN interface to be used.*
Value: Auto, 10Base-Half, 10Base-Full, 100Base-Half, 100Base-Full, 1000BASE-T
This locks and protects the USB memory slot.
Value: Unblock, Block
This locks and protects the USB interface connector.
Value: Unblock, Block
This locks and protects the optional interface slot.
Value: Unblock, Block
manuals search engine
Description
Description
Description
Description
9-21