Connecting Cables; Connecting Lan Cable - Kyocera FS-3640MFP Operation Manual

Hide thumbs Also See for FS-3640MFP:

Table of Contents

Preparation before Use > Connecting Cables

Connecting Cables

The equipment can be connected with a network cable and used as a network printer or network scanner.

Connect the machine.

Set up the machine.

Configure the network settings.

Check that the indicators are off.

Connect the LAN cable to the network interface located on left side of the body.

Connect the other end of the cable to the hub.

For details, refer to Machine Setup Wizard on page 2-20.