Job Accounting Default Setting; Setting Items - Kyocera FS-3640MFP Operation Manual

Setup, Registration, and User Management > Job Accounting

Job Accounting Default Setting

Sets default settings related to job accounting.
Display the screen.

Setting Items

Apply Limit
Copier/Printer Count
Default Counter Limit
* The next job will be prohibited in sending or in storing in the box.
Downloaded from www.Manualslib.com
1
Referring to Job Accounting Settings on page 9-52, display the screen.
2
System Menu/Counter.
User Login/Job... - Job Accounting Settings
Accounting List
Default Setting
Use [ ] or [ ] to scroll up and down.
Item
This specifies how the machine behaves when the counter has reached the limit of
restriction.
Value
Immediately*: Job stops when the counter reaches its limit.
Subsequently: Printing/scanning of the job continues but the subsequent job will be
rejected.
Alert Only: Job continues while displaying an alert message.
You can select how the copying and printing page counts are shown - either the total of
both or each of copying and printing individually. The selection may influence restriction
on the count and count method.
Refer to Restricting the Use of the Machine on page 9-59, Counting the Number of
Pages Printed on page 9-61 and Printing an Accounting Report on page 9-63 for
details.
Value: Total, Individual
When you add a new account, you can change the default restrictions on the number of
pages used.
Refer to Restricting the Use of the Machine on page 9-59.
Value: 1 to 9,999,999 in 1-sheet increments
manuals search engine
10:10
2/2
< Back
Description
9-64
System Menu/Counter.
User Login/Job Accounting - Default Setting
Apply Limit
Subsequently
Copy/Printer Count
Individual
Default Counter Limit
< Back
10:10
1/1