Kyocera FS-3640MFP Operation Manual page 240

Setup, Registration, and User Management > System Menu
Item
IPv6 Settings
IPv6
Manual Setting
RA (Stateless)
DHCP
* After changing the setting, restart the system or turn the machine OFF and then ON.
Downloaded from www.Manualslib.com
Set up TCP/IP (IPv6) to connect to the network. The IPv6 setting is available when selecting
[On] for [TCP/IP].*
Sets whether to use IPv6.
Value: Off, On
Manually specify the IP address, prefix length, and gateway address of TCP/IP (IPv6). The
Manual Setting is available when selecting [On] for [IPv6].
Value
IP Address (Manual): (numbers (128 bit in total) separated by colons)
Prefix Length: 0 to 128
Default Gateway: ###.###.###.###
NOTE: [Default Gateway] is displayed when selecting [Off] for [RA (Stateless)].
Select whether or not to use RA (Stateless). The RA (Stateless) setting is available when
selecting [On] for [IPv6].
When selecting [On], [IP Address 1 (to 5)] appears under [IP Address (Stateless)/Prefix
Length].
Value: Off, On
Select whether or not to use the DHCP (IPv6) server. The DHCP (IPv6) setting is available
when selecting [On] for [IPv6].
Value: Off, On
manuals search engine
Description
9-18