Network Settings - Rational CombiMaster Plus CMP 61 Original Operating Instructions

Network settings

How to configure the network settings on your unit is described below. The following
settings may be made:
IP address
Subnet mask
Gateway
step
1
2
3
4
5
6
88 / 107
info/button instructions
Turn the top dial to the "Prog/Clean | START"
button.
Turn the temperature selector to the right until
"IP" appears.
"IP" will appear on the display.
Press the button.
Now turn the temperature selector to the left
until it stops and "IP 1" appears on the display.
A number will now appear in the time display
(bottom display). This is the first block of four IP
addresses. E.g. 10.x.x.x.
Change the number with the time selection
switch.