Set Date/Time And Auto Power Off Time - Extech Instruments HDV540 User Manual

9.2 Set DATE/TIME and AUTO POWER OFF Time
From the main menu, use the arrow buttons to scroll to the Date/Time icon and press OK
to open it. There are three rows of selections in this menu.
ROW 1 (top). Set the year, month, and day. Use the up
and down arrow buttons to select the year, month, or
day field (digits highlight when selected) and use the
PHOTO (decrement) and VIDEO (increment) buttons to
set the date.
ROW 2. Set the clock (hours, minutes, and seconds). Use
the up and down arrow buttons to select the hours,
minutes, or seconds field and use the PHOTO and VIDEO buttons to set the time.
ROW 3. Auto Power Off can be set to 30, 25, 20, 15, 10, 5 or 0 minutes (center digits)
Selecting the symbol
Auto Power Off utility.
9.3 AV Output Selections
 From the main menu, use the arrow buttons to scroll to the AV Output icon and press OK
to open it.
 Connect the Phone plug end of the AV cable to the AV Output port (6) of the Main Unit
and connect the RCA connectors to the external monitor, respectively.
 Use the arrow buttons to highlight the desired output
signal type (PAL or NTSC) and press OK to begin sending
the output signal to the remote monitor. The display will
exit the programming mode and return to the main
operating display.
 Use the ESC key to abort the output selection process, if
desired, and return to the programming main menu.
9.4 Factory Default Reset and Firmware Version
 From the main menu, use the arrow buttons to scroll to the Factory Default icon and
press OK to open it.
 There are three rows of options in this menu: Top row is
the factory default reset icon (to revert to factory
default settings: highlight this icon with the arrow
buttons and activate with the OK button).
 The middle row is the abort function. Press OK with the
RETURN symbol highlighted to return to the main
function menu.
 The bottom row shows the firmware version number.
will change the symbol color to red
11
EXTECH INSTRUMENTS
which disables the
HDV540‐en‐US_V1.0 12/15