Software Update - T+A CALA CDR User Manual

Software
update
generally

Updating via
the Internet

Software update

Software updates keep your CALA CDR up-to-date. They bring new
optimisations like faster operation and new features which were not
available at the time the device was produced.
It may occur that after a software update some of your user defined
settings like network parameters or favourite stations are lost and have to
be restored after the update.
Updating the firmware via the CALA CDR's Internet connection

The basic requirement is a functioning network with router and
access to a broadband Internet connection; the system must be
operating.

Switch the machine on.

Call up the system configuration menu by pressing the 
button on the remote control handset.

Use the  /  buttons to select the "Device info" menu
item, and confirm your selection by pressing the  button.

Select the "Update" menu point with the  /  buttons,
then press the  button to confirm your choice.

The Select option "WEB" should now be active (highlighted).

The firmware update can now be started by pressing .

The screen displays the current state of progress of the update.

Once the update has been completed (duration around ten minutes)
the device automatically switches itself off and restarts.

When the machine has restarted, the update is complete.

To ensure that the update was successful, access the "Device Info"
menu point mentioned above, and check the new firmware status.
65