Safety Notes - T+A CALA CDR User Manual

Installation
Power supply
Mains leads /
Mains plug

Safety notes

For your own safety please consider it essential to read these
operating instructions right through, and observe in particular the notes
regarding setting up, operation and safety.
Please consider the weight of the device. Never place the device on an
unstable surface; the machine could fall off, causing serious or even
fatal injury. Many injuries, especially to children, can be avoided if the
following simple safety precautions are observed:

Use only such items of furniture which can safely bear the
weight of the device.

Ensure that the device does not project beyond the edges of the
supporting furniture.

Do not place the device on tall furniture (e.g. bookshelves)
without securely anchoring both items, i.e. furniture and device.

Explain to children the hazards involved in climbing on furniture
to reach the device or its controls.
When installing the unit on a shelf or in a cupboard it is essential to
provide an adequate flow of cooling air, to ensure that the heat
produced by the unit is dissipated effectively. Any heat build-up will
shorten the life of the unit and could be a source of danger. Be sure to
leave free space of 10 cm around the unit for ventilation.
If the system components are to be stacked then the amplifier must be
the top unit. Do not place any object on the top cover.
The unit must be set up in such a way that none of the connections
can be touched directly (especially by children). Be sure to observe the
notes and information in the section 'Installation and Wiring'.
The device is intended to be connected to mains outlet with protective
earth connector. Please connect it only with the mains cable supplied
to a properly installed mains outlet with protective earth connector.
The power supply required for this unit is printed on the mains supply
socket. The unit must never be connected to a power supply which
does not meet these specifications. If the unit is not to be used for a
long period disconnect it from the mains supply at the wall socket.
Mains leads must be deployed in such a way that there is no danger of
damage to them (e. g. through persons treading on them or from
furniture). Take particular care with plugs, distribution panels and
connections at the device.
Unplugging the mains plug will disconnect the device from the mains
for service and repair. Please make sure that the mains plug is easily
accessible.
53