Ambient Colour Cycling - T+A CALA CDR User Manual

Menu item
Ambient
colour cycling

Menu item
Language

Menu item
Device name
Menu item
Network
Menu item
Music services


20
If you have configured the ambient colour (see menu item above) to the
setting "flowing", under this menu item you can adjust the speed the
ambient lighting cycles through the different colours in four steps from
very slow to fast.
This menu item only appears, if under the menu item "Ambient colour"
the setting "flowing" is selected.
In this menu point it is possible to determine the language which is to be
used for the displays on the integral screen on the front panel of the
.
The language used for any transferred data, e.g. from an Internet radio
station, is determined by the device itself or the radio station, and
therefore cannot be selected on the
This menu point can be used to assign an individual name to the
. In a home network the device then appears under this name.
All network settings can be carried out at this menu point. For a detailed
description on setting up a LAN or WLAN connection please also refer to
the section entitled "Network configuration".
At this point you can enter the access data for the music streaming
services (TIDAL etc.) supported by the
Calling up this menu point by pressing the  button displays a list
of the supported music services.
Select the service you wish to use, then confirm your choice with the
 button.
Now use the alpha-numeric keypad of the FM1000 to enter the access
data which you have received from your service provider in the lines
"User" and "Passphrase".
Use the  button to switch between numeric and alpha-numeric
input, and between capitals and lower-case letters.
Press the  button to erase any letter.
In each case confirm your input of user name and password by pressing
the  button.
To conclude the procedure and save the data, select the menu entry
"Store and exit?" and confirm by pressing the  button.
If access data for the selected music service has already been stored,
the new data will overwrite them. To use the new access data you must
first perform a "Logout" for the service in question, then switch the
off and on again.
The music streaming services supported by the
subscription to the appropriate service provider.
.
.
require a