The Configuration for a WLAN connection
Setting the
parameters for
a wireless
network
Selecting and connecting a WLAN by hand
Searching for
and Selecting
the Network
Entering the
Password (for
encoded
networks)
60
Now switch the
menu by pressing the button on the remote control handset or
the front panel of the
Use the / buttons to select the menu point "Network",
then confirm your choice with the button.
The following menu now opens:
First select the menu point "Scan for WLAN", and activate it by
pressing the button.
A list of the WLANs found is displayed on the screen.
Use the / buttons to select the WLAN to which you
wish the
button
If the network is encoded, the window shown below will appear once
the WLAN is selected.
At this point please enter the network password and confirm your input
by pressing .
Select the "Store and exit?" point, and confirm your choice with
.
on, and open the System Configuration
.
to be connected, and confirm your choice with the
settings