Alarm Timer Menu - T+A CALA CDR User Manual

Calling up and
operating the
menu
Menu item
Alarm
Menu item
Alarm Time
Menu item
Alarm Source

Menu item
Alarm Vol.
Menu item
Time Mode

Alarm Timer menu


A long press on the  button calls up the menu.

When you open the menu, you will hear the currently set alarm source
at the currently set alarm volume.

The screen displays the following Select points:

Use the  /  to select a point in the menu.

If you wish to change a selected menu point, first press the 
button, and then use the  /  buttons to alter the value.
 To accept the setting once you have altered the value, press the
 button again.
 If you wish to quit without accepting an alteration you have made,
press the  button at any time.

Press the  button again to leave the menu.
In this menu point you can select whether the machine is to be switched
on automatically, and using which alarm.
Manual alarm time setting for the currently active alarm. Any change you
make at this point takes place slowly at first; holding the button pressed
in increases the rate of change.
Selects the source which is to be switched on at the alarm time point.
If you select the menu point Radio, you can use the  / 
buttons to select a radio station from the Favourites list.
Waking to the radio:
Take care to set a station which can be received well.
You can set the alarm volume at this point. If you change the volume
setting, the system immediately accepts the displayed volume level, and
the change in volume is audible.
This menu point is used to determine how the internal clock is set.
FM / DAB: If you select the menu point FM or DAB, you can select a
radio station from the Favourites list using the  /  buttons.
If a station is selected, the time of day is automatically read out from the
RDS signal at night. If the selected station is the current listening source,
then the time of day is also taken from the machine when it is switched
on. This only works if a good RDS signal can be received.
It is not possible to adjust the time of day manually!
23