Switching Radio Text On And Off - T+A CALA CDR User Manual

Switching
Radio Text on
and off
Mono / Stereo
(only FM –
Radio)

DAB - Radio
Selecting DAB
radio

Display
30
The Radio text function can be switched on and off by briefly pressing the
 button on the remote control handset.
You can toggle the radio of the
reception by briefly pressing the  button. The reception mode is
shown on the screen by the following symbols:
' ' (Mono) or '' (Stereo)
If the station you wish to listen to is very weak or very distant, and can
only be picked up with severe background noise, you should always
switch to MONO mode as this reduces the unwanted hiss significantly.
The Mono and Stereo symbols are only shown in the detailed screen
display.
Briefly tap the  button on the FM1000 remote control handset,
repeatedly if necessary, until the source "DAB Radio" is displayed on the
screen.
Depending on the frequency band (block), it may take up to two seconds
to switch stations when in DAB mode.
a) Displays the type of reception currently in use.
b) Hear the music type or style is displayed, e.g. Pop Music.
This information is only displayed if the transmitting station
broadcasts it as part of the RDS system. If you are listening to a
station which does not support the RDS system, or only supports it in
part, these information fields remain empty.
c) The frequency and / or the station name is displayed in enlarged
form. If a station name is displayed, its frequency is shown in area 'e'.
between stereo and mono