Mains input
ANT
(Aerial input)
Digital DIG 1
Digital DIG 2
Digital DIG 3
Digital OUT
GND
48
Back panel connections
The mains lead is plugged into this socket.
For information on correct mains connections please refer to the
notes in the Chapters 'Using the system for the first time',
'Wiring' and 'Safety Notes'.
The
suitable for a cable connection as well as a standard domestic
radio aerial. For first-class reception quality a high-performance
aerial system, competently installed, is a fundamental necessity.
Inputs for digital source devices with an optical digital output.
At these inputs the
conforming to the S/P-DIF norm, with sampling rates of 32 to 96
kHz.
These inputs are equipped with an automatic power on function.
Please refer chapter 'System settings / source settings'
Input for digital source devices with a co axial digital output.
At this input the
conforming to the S/P-DIF norm, with sampling rates of 32 to 192
kHz.
This input is equipped with an automatic power on function. Please
refer chapter 'System settings / source settings'
At this socket is the signal from the chosen source available. It can
be transmitted to e.g. a digital recorder.
It is not possible to produce a digital version of all played media, as
in some cases the original contains copyright protection.
The ground lead from an analogue record player is connected here
in order to avoid hum.
features a 75 aerial input marked ANT which is
accepts digital stereo signals
accepts digital stereo signals