Volume Adjustment - T+A CALA CDR User Manual


Stop playback


Switch track
 /




Volume
adjustment

Notes
Pressing the  button halts playback.
A brief press on the  /  buttons during playback causes the
device to jump to the next or previous piece of music within the current
playlist.
Please note that many AVRCP-capable mobile devices do not support
the controlling through the
manufacturer of your mobile device.
To achieve the best possible playback quality, you should only adjust the
volume on the
possible on your mobile device, but not so high that the signal is
distorted.
Any further changes to volume should then be made using the
 /  button on the FM1000.
The has been tested with a large number of Bluetooth-
capable mobile devices. However, we are unable to guarantee general
compatibility with all devices available commercially since the range of
equipment is so wide, and the various implementations of the Bluetooth
standard differ widely in some cases. If you encounter a problem with
Bluetooth transfer, please contact the manufacturer of the mobile device.
The maximum range of a Bluetooth audio transfer is normally about 3 to
5 metres, but the effective range may be affected by a number of factors.
To achieve good range and interference-free reception there should be
no obstacles or persons between the
Bluetooth audio transfers take place in what is known as the "everyman
frequency band", in which many different radio transmitters operate -
including WLAN, garage door openers, baby intercoms, weather stations,
etc. Radio interference caused by these other services may cause brief
dropouts or - in rare cases - even failure of the connection, and such
problems cannot be excluded. If problems of this kind occur frequently in
your environment, we recommend that you use the Streaming Client or
the USB input of the
By their nature, Bluetooth transmissions always involve data reduction,
and the attainable sound quality varies according to the mobile device in
use, and the format of the music to be played. As a basic rule the
maximum quality of music which is already stored in a data-reduced
format, such as MP3, AAC, WMA or OGG-Vorbis, is worse than with
uncompressed formats such as WAV or FLAC.
reproduction quality we always recommend the use of the Streaming
Client or the USB input of the
. In case of doubt, please ask the
itself: set the playback volume as high as
instead of Bluetooth.
instead of Bluetooth.
and the mobile device.
For the highest
41