T+A CALA CDR User Manual page 49

Analog IN 1 / IN 2
)
Analog OUT (
SUB OUT
USB 1
USB 2
LAN

Universal analogue stereo sound input

 These inputs are equipped with an automatic power on function.
Please refer chapter 'System settings / source settings'

In the System Configuration menu it is possible to configure the
input IN 2 as input for an analogue turntable (pick-up).

Analogue audio output (Pre Out), typically for connecting active
loudspeakers or headphones.
The level of this output is variable; the level is controlled in parallel
with the loudspeaker outputs.

A 3.5 mm barrel socket
Cinch / RCA output, for connecting headphones. The function of
the two outputs is identical.


The use of headphones
Continuous listening to programme material via earphones or
head-phones at very high volume can result in permanent hearing
loss. You can avoid damaging your health by not listening via
headphones or ear-phones at high levels for long periods.

Output socket for an active sub-woofer.
The use of a sub-woofer is optional.

If a sub-woofer is connected, it must be switched on in the
Loudspeaker
Loudspeaker').

Sockets for a USB memory stick or external hard discs
The storage medium can be formatted with the FAT16, FAT32,
NTFS, ext2, ext3 or ext4 file system.
The USB storage medium can be powered directly via the USB
port provided that its current drain is in accordance with the USB
norm. Normalised 2.5" USB hard discs can be connected directly,
i.e. without a separate mains PSU.

Router socket

If LAN is connected, the LAN connection has priority, and WLAN is
automatically disabled.

is available, wired in parallel with the
menu (see Chapter 'System Settings,
49