Storing Network Settings And Restarting - T+A CALA CDR User Manual

Storing
Network
Settings and
Restarting
Connecting to WLAN via the WPS-function
WPS-function
Connecting
WLAN
automatically
via the WPS
function
Selecting the
WLAN
manually and
conneting via
WPS
Finally select the "Store and exit?" menu point and press the 
button to accept the settings.
The supports WPS for WLAN setup. WPS (Wi-Fi Protected
Setup) an easy process for establishing a secure WLAN connection.
WPS can be used to connect the
and convenient way. For that usage most modern routers have
implemented the WPS function.
 First activate the WPS-function of the Router or Repeater to which you
wish the
manual of the device in question.
 Start the WPS-Autoconnect function of the
minutes.
 Use the  /  buttons to select the menu point "WPS-
Autoconnect", then confirm your choice with the  button.
 After the connection is established, the line "Status" shows the
connected WLAN network.
 Finally select the "Store and exit?" menu point and press the 
button to accept the settings.
If the WPS function connects the
preferred WLAN can be also selected manually and only the
authentication can be done by the WPS function. The procedure is
described in the following:
 First activate the WPS-function of the Router or Repeater to which you
wish the
manual of the device in question.
 First select the menu point "Scan for WLANs", and activate it by
pressing the  button.
 A list of the WLANs found is displayed on the screen.
 Use the  /  buttons to select the WLAN to which you
wish the
 button
to be connected. For details please refer the
to be connected. For details please refer the
to be connected, and confirm your choice with the
with your router in a quick
within 2
to the wrong WLAN, the
61