Ethernet Led And Hdd/Power Leds - Advantech PCM-5820 User Manual
Pcm-5820 series pentium-based single board computer with svga/lcd, ethernet, and audio interface
Hide thumbs
Also See for PCM-5820:
- User manual (124 pages) ,
- Manual (114 pages) ,
- Startup manual (4 pages)
Table of Contents
Advertisement
2.19 Ethernet LED and HDD/power LEDs
2.19.1 LED1 (Ethernet LED)
Table 2-7: Ethernet LED setup
LED
Green lamp
Yellow lamp
The LED should be set so that when the cable is connected, the
yellow lamp is activated; and when data is transmitted, the green
lamp is activated.
2.19.2 LED2 (Power and HDD LED)
Table 2-8: HDD/power LED setup
LED
Green lamp
Yellow lamp
The LED should be set so when the HDD is accessed the yellow
lamp is activated, and when the power is on the green lamp is
activated.
2.20 Watchdog timer configuration
An on-board watchdog timer reduces the chance of disruptions
which EMP (electro-magnetic pulse) interference can cause. This
is an invaluable protective device for standalone or unmanned
applications. Setup involves one jumper and running the control
software (refer to Appendix C).
Setting
Tx
Link
Setting
Power
HDD
Chapter 2 Installation
25
Advertisement
Table of Contents
