Advantech PCM-5820 User Manual page 42

3. At the prompt, type in the BIN file which supports your
display. When you are sure that you have entered the file name
correctly press <Enter>. The screen will ask "Do you want to
save?" If you wish to continue press Y. If you change your
mind or have made a mistake press N.
4. If you decide to continue, the screen will issue a prompt which
will then ask "Are you sure to program (Y/N)?" If you wish to
continue, press Y. Press N to exit the program.
The new VGA configuration will then write to the ROM BIOS
chip. This configuration will remain the same until you run the
AWDFLASH.EXE program and change the settings.
30 PCM-5820 Series User's Manual